Spread the Cost … at Dabs Direct Online Electrical Store ~ Big Savings on Computers, Networking, GPS Systems, TV's, and other Electrical Goods
|
www.Dabs.co.uk
Spread the Cost … at Dabs Direct Online Electrical Store ~ Big Savings on Computers, Networking, GPS Systems, TV's, and other Electrical Goods |
The xStack DGS-3450 next generation switch delivers performance, flexibility, security, multi-layer Quality of Service (QoS) and redundant power option for the SMB and enterprises. With high Gigabit port densities for desktop connections, SFP fibre connectivity, 10-Gigabit uplink options and enhanced Layer 2+ functions, this switch comprises the workgroup access-layer stack for seamless integration with L3 core switches to form part of a multilevel network structured with high-speed backbone and centralized servers. The DGS-3450 can operate as a stand-alone device or part of a scalable stack. Embedded with Single IP Management capability, a stand-alone switch can form part of a virtual stack, where intra-stack traffic flows through the usual network wires, doing away with the costly stacking cables. Without stacking cables, cable distance barriers and physical stacking limitations, a virtual stack can comprise units that are located anywhere on the network that minimizes the impact of any single point of failure. Alternatively, optional 10-Gigabit modules can be installed in the open slots to create a physical stack. Up to 12 units or 576 Gigabit ports can be configured for a stack. Users can install one or two single-port modules, depending on whether the fault-tolerant Ring or Star stacking is implemented. With each of these ports providing 20Gbps full duplex transmission on the cost-effective coaxial cable, the DGS-3450 provides not only high-bandwidth stacking but also cost control capability that allows users to add ports strictly on a per need basis. Modules with single 10-Gigabit XFP can also be installed in any of the open slots for uplink to a server or a fibre backbone. The DGS-3450 provides a complete set of security features, which includes L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. In addition, it offers suppression capabilities, Layer 3 IP v.4/v.6 Static Routing and IP v.6 tunnelling to increase network performance and security. To ensure that not only proper user access is served, but also malicious traffic within the network is prevented, the DGS-3450 includes a Health Check mechanism that provides pro-active network security without the need for manual intervention from the administrator. The DGS-3450 provides extensive VLAN support including GARP/GVRP, 802.1Q and asymmetric VLAN to enhance security and performance. To support converged applications including VoIP, ERP, Intranet and videoconference, a robust set of L2/L3/L4 QoS/CoS features ensures that critical network services are served with proper priority. With Multi-layer L2/L3/L4 bandwidth control and D-Link Safeguard Engine, the DGS-3450 can set limits to traffic flows from the edge of the network while automatically prevents broadcast packets and bulk traffic generated by Internet Dos-related activities from utilizing the switch's CPU resources. This prevention of unnecessary and harmful traffic can increase the overall network serviceability, reliability and availability of the stack.… learn more about this D-Link XStack 48-Port Gigabit Layer 2.
UK >> D-Link XStack 48-Port Gigabit Layer 2 - Buy it Now
★
Check for Special Discounts on this D-Link XStack 48-Port Gigabit Layer 2
Spread the Cost: If you can't afford it right now, then no problem. With a Dabs Direct instant credit account you can spread the cost across weeks or even months, and still enjoy the D-Link XStack 48-Port Gigabit Layer 2 right away. So, take advantage of purchasing today, and spreading the cost over up to 36 months.
Information technology professionals rely on HP quality to ensure maximum productivity. As the power of applications, processors, memory adapters and storage devices increases, high-end computer users are seeking ways to optimize their system performance. HP provides leading solutions, adding new levels of performance, availability, flexibility, and management.
The D-Link DFE-580TX is a 32-bit PCI 4-port 10/100 Mbps Ethernet adapter. Specifically designed for a client/server environment, the DFE-580TX provides a redundant pathway through fault tolerance and load balancing. With fault tolerance, the DFE-580TX guarantees connection in the event where one port is disabled. The DFE-580TX is targeted at server environments in small, medium, and large businesses.
The DFE-580TX adheres to IEEE 802.3 10BaseT and 802.3u 100BaseTX. The DFE-580TX supports both Half and Full Duplex operations at 20/200 Mbps data speeds used in conjunction with 802.3x flow control support. With the DFE-580TX auto-negotiation support, connection speed is negotiated at the highest speed to a compliant switch. The DFE-580TX also supports PCI bus mastering for quick memory access, which provides high throughput and low CPU utilization.
The DP-300+ multi-port print server is designed to share a cluster of printers. It is equipped with 2 parallel printer ports and 1 serial port, allowing 2 parallel printers and 1 serial printer to be shared over the network. Supporting multiple network operating systems, this device brings a high level of flexibility and performance to your office printing needs.
With 3 printer ports available from a single device, you don't need to purchase and install a separate print server for each printer. All printers attached to this device can print their print jobs at the same time, giving your multi-port print server a similar performance as that of 3 separate single-port print servers.
HP PJL protocol is supported for bi-directional network printer communication, providing you with critical information about the network printer.
The D-Link ANT24-1400 is a high-Gain antenna ideal for point-to-point environment.
This desktop switch is designed for small offices and larger workgroups.
All ports auto-sense the network speed of the computers and hubs to run at either 10Mbps or 100Mbps. The ports also auto-negotiate between full and half duplex and support flow control. Expansion is easy through a MDI uplink port. You cascade several switches together through this port to get more ports.
IEEE 802.3x Flow Control allows your servers to directly connect to this switch for fast, reliable data transfer.
The D-Link ANT24-1201 is a high-Gain antenna ideal for point-to-point environment.
Now you can enjoy full Layer 3, Gigabit functionality at an affordable price. The NETGEAR Managed Gigabit Switch provides maximum throughput and flexibility for demanding networks, with all the Layer 3 features you expect. This 10/100/1000 switch addresses today's high-performance requirements, while providing the control you need - and the future proofing you want. The GSM7324 is ideal as a backbone for 10/100 switches, Gigabit servers, or as the robust core of a demanding, all-Gigabit network.
The GSM7324 can be used to inexpensively off-load routers that are segmenting your network and lay the groundwork for new IP-based services. Layer 3 routing combined with Quality of Service, bandwidth provisioning and access control features enable Voice over IP (VoIP) telephony, video conferencing, and other cost-saving applications.
The 16-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each user's requirements. Either way, it's perfect for graphics, multimedia, and other applications that have to move large files across the network quickly.
With the 16-Port 10/100/1000 Gigabit Switch, you can connect your existing 10/100 Ethernet network to a Gigabit server backbone without any additional equipment. All ports have automatic MDI/MDI-X crossover detection, so you don't have to worry about the cable type. Each port independently and automatically negotiates for best speed and whether to run in half- or full-duplex mode. Address learning and aging is supported, as well as 802.3x flow control with head-of-line blocking prevention to keep your high-speed clients from bogging down in lower-speed traffic. Fast store-and-forward switching prevents damaged packets from being passed on into the network.
The AirPlus XtremeG DWL-2100AP is an enhanced high-performance 802.11g wireless Access Point for use indoors. This device supports wireless networking speeds of up to 108Mbps (Turbo mode) on the popular 2.4GHz public frequency, while providing seamless interoperability with existing 802.11b wireless equipment.
The DWL-2100AP can be configured to operate in any one of the 5 modes: (1) as a wireless access point, (2) a point-to-point bridge with another access point, (3) a point-to-multi-point wireless bridge, (4) a wireless client or (5) a wireless repeater. With these built-in functions, the DWL-2100AP gives you the flexibility to configure the device to meet your environment's requirements.
Enhanced security is provided with Wi-Fi Protected Access to authorize and identify users based on a secret key that changes automatically at a regular interval. Used in conjunction with a RADIUS server, WPA employs TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets. This insures much greater security than the standard WEP security, which requires the keys to be changed manually.
The DWL-2100AP supports 802.1x authentication for protection against network intrusion. Used in conjunction with a RADIUS server, this function provides a means to verify the identity of the client before an access to the network is granted.
The Small Form-factor Pluggable (SFP) Gigabit interface Converter (GBIC) slots on NETGEAR's managed switches provide you with a highly adaptable network. You have the option of building your network for copper and/or fiber gigabit connections. Due to the automatic detection capabilities of the switch, installation of the SFP GBIC only requires that you plug the module into the module slot. Plugging an AGM731F module will disable the associated RJ-45 port.
PRODUCT FEATURES:
Adds fiber optic connectivity to the GSM7324;
Small size for high-density fiber connections;
Meets SFP GBIC standard for use with any SFP GBIC compliant slot;
1000BaseSX connectivity;
LC connectors;
Supports both 50um and 62.5um multimode fiber cables.
The DGS-3324SR is the first in a new series of "Next Generation" high performance stackables from D-Link Systems. The DGS-3324SR blends many features typically found in more expensive chassis based solutions, (high density, hot swap, redundant power options, and high performance) with the price and flexibility of a stackable.
The DGS-3324SR is a Layer 3, (24) port managed 10/100/1000Mbps with (4) combo ports supporting SFP modules. The DGS-3324SR has an 80Gbps switch fabric and supports dual integrated 10Gigabit-stacking ports for up to 40Gbps of full-duplex stacking bandwidth.
The architecture of the DGS-3324SR supports stacking of up to 10 units in any combination using the integrated rear 10Gig stacking ports in a "Fail-Safe Ring" configuration. Each unit also supports D-Link's optional Redundant Power option, the DPS-500. Other features include support for 802.3ad (Link Aggregation), 802.3d (Spanning Tree), and 802.3w (Rapid Spanning Tree) for increased network reliability and availability.
The DGS-3324SR supports a variety of network management options including: console CLI, telnet, web, SNMPv1/v2/v3, RMON, TFTP, Port Mirroring, BootP, and DHCP. The DGS-3324SR also supports a variety of advanced traffic management options including: 802.1x, Bandwidth Control, Broadcast Rate Limiting, and support for IGMP Snooping v1/v2 .
The DGS-3324SR implements a robust and consistent set of QoS/CoS, VLAN, and Security features. The DGS-3324SR supports 8 priority queues for 802.1p/TOS/DiffServ, with classification and marking based on MAC SA/DA, IP SA/DA, and/or TCP/UDP port numbers. Layer 3 dynamic routing protocols include: RIPv1/v21, OSPFv21, and DVMRP1. Security features of the DGS-3324SR include: 802.1x (port based authentication) 802.1x (MAC based authentication)2, Access Control Lists based on MAC address, IP address, and/or TCP/UDP port numbers. The DGS-3324SR also has extensive support for GARP/GVRP, 802.1q, and port based VLANs for up to 255 groups per device.
The DGS-3324SR switch is the latest example of D-Link Systems' continued commitment to our channel partners and customers to be the industry leader in delivering affordable, reliable, high performance, feature rich switches.
Joining NETGEAR's family of Smart Switches with simple switch management at no extra cost, this 24-port Gigabit switch is high on value and capability. With 24 10/100/1000 Mbps ports, each capable of powering 2000 Mbps of data throughput in full-duplex mode, plus two optional fiber ports, it provides fast backbone and connects servers or power users, delivering large amounts of multimedia, image, and video information in no time at all. Ideal for combining 10, 100, and 1000 Mbps devices it delivers 10/100/1000 automatic speed and full/half-duplex sensing plus Auto Uplink on every port. Two hot-swappable Small Form factor Pluggable (SFP) GBIC slots provide optional fiber connectivity for greater distance. An intuitive, web-browser interface offers simple switch management, making it a snap to monitor switch performance, configure ports, even set up trunks, VLANs, and prioritization.
NETGEAR delivers wirespeed Gigabit performance and a full set of Layer 2 management features with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it - to high-performance workgroups at the edge of the network, or as a backbone for 10/100 switches and Gigabit servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 24 10/100/1000 ports. Layer 2 management functionality delivers reliability, control, and availability. It's an easy to use solution that delivers maximum performance right out of the box. The very affordable NETGEAR GSM7224 Layer 2 Managed Gigabit Switch creates a more productive - and future-proof - network. With increasing bandwidth requirements from applications such as video, voice, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today's high-performance environments. Optimize bandwidth, security, and control with full Layer 2 management capabilities - extensive VLAN support, resiliency, traffic prioritization, port trunking, port mirroring, RADIUS, SNMP, and DHCP features, as well as broadcast storm protection. Fiber connectivity is enabled through four combination Small Form-factor Pluggable (SFP) gigabit ports. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth, and throughput.
Computers do not require Internet access all the time; neither do switches utilize all ports at all times. When a computer or network equipment is shutdown, switches often remain on and continue to consume considerable amount of power. With Green Ethernet technology, D-Link switches can automatically detect link status and reduce power usage of ports that are idle. Computers or any connecting parties set to standby mode (not power off), however, will not provide significant power savings.
The Green Ethernet switches have the ability to analyze the length of any Ethernet cable connected to them for adjustment of power usage accordingly. Shorter lengths require less power.
For a traditional switch, power consumption remains constant even when the ports are not in use. In a standard workday scenario where PCs are used for 10 hours a day and powered off 14 hours a day, and connected to the switch using 20 meter cables, D-Link's Green Ethernet can save up to 20% power used for each system.
Get the blazing speed of Gigabit Ethernet with the D-Link GigaExpress DGS-1016D, a 16-port 10/100/1000Mbps Gigabit Switch that delivers power, performance, and reliability in one cost-effective, space-saving design. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality.
Power users in the office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. The versatile and compact 1RU height design of the DGS-1016D enables the device to be rackmounted in a standard 19 inch rack, while conserving valuable rack space.
It features a non-blocking switching architecture that filters and forwards packets at full wire-speed for maximum throughput. An 8K MAC address table provides scalability for even the largest networks. Address learning and aging, 802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission.
Designed using industry standards, it is compatible with virtually all 10, 100, and 1000Mbps Ethernet devices and other vendor equipment. The D-Link DGS-1016D 10/100/1000 Mbps Gigabit Switch protects your existing network investments while providing you with a straightforward migration path to faster Gigabit speeds.
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
It also features diagnostic LEDs which display status and activity, allowing you to quickly detect and correct problems on the network. Every port also supports a cable diagnostic feature that helps to detect cable related problems.
* Product Highlights *
The DGS-1224T copper Gigabit Smart Switch presents a cost-effective solution for the small and medium business to implement Gigabit Ethernet packet switching with easy fine-tuning of network performance and security. This switch includes 24 10/100/1000BASE-T copper Gigabit ports and 2 combo SFP (Mini GBIC) ports for flexible fiber Gigabit connection. Port trunks are provided for server deployment and network backbone attachment, while functions important for bandwidth-intensive applications such as Priority Queues and VLANs are supported to enable you to implement Quality of Service (QoS) and security without having to go through complex network management usually found in other managed switches.
24 Gigabit ports provide an inexpensive alternative solution to fiber-optic. Using your existing low-cost Cat. 5 copper twisted-pair wires as the transmission media, these ports allow you to instantly upgrade your servers to Gigabit capability without requiring you to install new, expensive fiber cables. All ports support 10/100/1000Mbps network speed auto-sensing, full/half duplex auto-negotiation and auto MDI/MDIX plug-and-play.
Ports can be combined together to create multi-link load sharing aggregated bandwidths to a server or a network backbone. To expand the network, you can also make use of the port trunks to eliminate bottlenecks between the cascaded switches. The switch allows you to combine between 2 and 4 ports per trunk to create multiple port trunks.
The switch support VLANs to let you improve security and bandwidth utilization by limiting the broadcast domains and confining intra-group traffic within their segments. To segment up the network, VLAN-supported workstations and servers that are connected to the switch can be grouped into different Virtual LANs (VLANs).
The switch supports Layer 2 802.1p Priority Queue control to prioritize network packets. Classification of users data priorities can be based on a data packet Priority Queue. This QoS function support allows you to run bandwidth-intensive and delay-sensitive applications and to attach video servers to the switch for videoconference.
*Product Highlights *
D-Link is an industry pioneer, market leader, designer and true manufacturer of networking communications and digital home electronic products. Excellence in manufacturing, innovation and a commitment to quality has allowed D-Link to produce cutting-edge, high-performance products within standard-based technologies. The company continues to offer the best value in the connectivity market today by combining high-quality products with the most affordable price point.
The DES-3526 switch forms an Ethernet workgroup stack with flexible Gigabit uplinks. Traffic runs along the units in this virtual stack through the full-duplex Gigabit interfaces and your usual network wires, dispensing of the costly and cumbersome stacking cables. Without any stacking cable, cable distance restrictions and physical stacking limitations, your stack can include units that are located anywhere on the network, minimizing the impact of any single point of failure.
The DES-3526 switch simplifies and speeds up your management tasks, as multiple switches can be configured, monitored and maintained from any workstation running a web browser through one unique IP address.
The stack is managed as a single object, with all units identified by a single IP address. You can see a Tree View of the members of the stack and a network topology showing the locations of the units and their link information. This simple yet powerful web-based management eliminates the need for you to install expensive SNMP network management software.
You can add units to up to 32 switches per stack, of any model in the xStack range. With embedded SIM, you can expand your Ethernet stack to include L3 core Gigabit and chassis-based switches to accommodate your network growth.
The DES-3526 provides a complete set of security features for connectivity and access control. These include Access Control Lists (ACLs) based on MAC address, switch port, IP address and/or TCP/UDP port numbers, 802.1X user authentication and MAC address control. The DES-3500 also provides central management for administration access via TACACS+ and RADIUS.
In addition, when implemented in conjunction with a D-Link NetDefend firewall, this switch -as a stand-alone or in a stack- is able to automatically quarantine any host displaying abnormal behavior by stopping the port connected to it. This mechanism, D-Link's ZoneDefense, provides proactive network security by preventing viruses from spreading through the network and thwarting harmful network attacks.
Without a NetDefend firewall, you can still rely on the Safeguard Engine feature to protect the switch against traffic flooding caused by virus/worm outbreaks.
The DES-3526 switch provides extensive VLAN support including GARP/GVRP, 802.1Q and asymmetric VLAN to enhance network security and performance. Bandwidth control allows you to set a traffic limit for each port to control the traffic volume from the edge of the network. 802.1w Rapid Spanning Tree with fast convergence of less than 15 seconds and a redundant power option increase the reliability and availability of your virtual stack.
The DES-3500 series implements a robust set of multi-layer (L2, L3, L4) QoS/CoS features to ensure that critical network services like VoIP, ERP, Intranet and video conference are prioritized. Priority queues for 802.1p/TOS/DiffServ are supported, with classification and marking based on MAC SA/DA, IP SA/DA, and/or TCP/UDP port numbers.
D-Link is an industry pioneer, market leader, designer and true manufacturer of networking communications and digital home electronic products. Excellence in manufacturing, innovation and a commitment to quality has allowed D-Link to produce cutting-edge, high-performance products within standard-based technologies. The company continues to offer the best value in the connectivity market today by combining high-quality products with the most affordable price point.
The DES-6500 is a core Layer 3 chassis-based Gigabit switch that provides everything a business needs for a switched network. This 9-slot chassis offers a high port density, comprehensive network media support with multiple link aggregation, a high switch fabric capacity of 160Gbps supporting wire-speed L2/L3 packet switching, fault tolerance with line card hot-swap and redundant power backup capabilities, Quality of Service (QoS)/Class of Service (Cos), complete user access security, traffic monitoring and comprehensive network management. Designed for performance and flexibility, this chassis offers you the edge device router simplicity and the price/performance ratio necessary to deploy a cost-effective enterprise, backbone and campus network.
The DP-G310 wireless print server provides a high-speed USB 2.0 printer port for connection to a USB-supported printer. Equipped with a 10/100BASE Ethernet and high-speed 802.11g (802.11b) wireless LAN interface, this device lets you conveniently share your printer with a group of home or office users.
The DP-G310 provides the necessary security for wireless users, using the user-selectable 64/128-bit industry-standard WEP (Wired Equivalent Privacy) encryption protocol. Data privacy mechanism is based on a shared key algorithm, as described in the wireless LAN standard.
The DP-G310 supports many network OS, including Windows, Apple MacOS, Linux, Solaris, SCO Unix and NetWare 5.x native NDS. This gives you the flexibility to install the print server, regardless of your network environment.
Setting up the print server is easy with a Windows-based menu-driven program, which guides you through all the necessary steps to set up and configure your network printer. SNMP and latest MIB-II MIBs are built into the print server, allowing you to manage this device on any SNMP standard- based network.
D-Link, the networking industry leader, delivers another innovative and versatile solution in wireless connectivity with the D-Link AirPremier AG DWL-7100AP Wireless Access Point. This dual-band (2.4GHz, 5GHz), tri-mode (802.11a, b, g) Access Point provides the most bandwidth coverage available in an AP. Multiple wireless clients can connect to the DWL-7100AP using both A and G wireless standards and any of its 11 non-overlapping channels to transfer data at speeds of up to 108 Mbps.
The DWL-7100AP operates seamlessly and simultaneously in both the 2.4GHz and 5GHz frequency and over multi-mode spectrums. Network Administrators can easily integrate various wireless managements with the DWL-7100AP Wireless Distribution System (WDS), offering modes in AP, Point-to-Point Bridge, Point-to-Multipoint Bridges, AP Client, and Repeater, allowing users to gain controls beyond a sole AP.
The DWL-7100AP is ideal for network administrators who require advanced management controls and network security features. The DWL-7100AP offers 152-bit WEP encryption. In addition, the DWL-7100AP incorporates WPA (Wi-Fi Protected Access), which has both certificate ticket verification and AES (Advanced Encryption Security) protocols available. All configuration settings are easily accessible via the Web-based interface. The Setup Wizard gets you connected to your network within minutes.
With transfer rates of up to 108Mbps in both 2.4GHz and 5 GHz bands, large bandwidth-intense files travel remotely over 15 times the transfer speeds of previous wireless devices. The tri-mode allows data transfer without the interference with other devices at one fixed wireless standard. For offices, schools, or residential and public areas, the DWL-7100AP establishes a network environment that allows users to wirelessly communicate with one another, share an Internet connection, and access data all at high speeds of up to 108Mbps.
The Belkin 16-Port Gigabit Switch allows you to easily upgrade your network to achieve gigabit transfer speeds. Backward-compatible with your existing 10/100 network, this Switch simply plugs in for instant high performance. It provides your servers and workstations the capacity to transfer large video, audio, and graphic files throughout your network.
Designed to provide efficient, reliable, and fast backbone for a small-to-medium-sized company, the Switch is easy to install. Its compact, 13-inch case easily positions on your desktop and included rack-mount hardware is included for optimal placement in a 19-inch rack. A metal chassis houses its internal power supply to ensure a durable form factor. All ports automatically adjust for straight-through or crossover cables.
Now you can have a powerful, high-speed network on a small scale. NETGEAR's GS116 Gigabit Ethernet Switch lets you build a system that provides a full, dedicated 1000 Mbps connections so you can move very large files across your network instantly. The standards-based GS116 helps to protect your existing and future network infrastructure investments by painlessly integrating other 10,100, and 1000 Mbps devices. This potent switch is ideal for workgroups or quickly upgrading workstations to full Gigabit speed, plus it's packed with ease-of-use features to simplify your workday experience. Its compact design fits neatly into small work spaces and, since it's self-cooling without a fan, it runs silently and unobtrusively.
The D-Link xStack DXS-3326GSR is designed to meet the most demanding high port density fiber requirements. Each unit provides 24 Gigabit fiber slots, including (4) 10/100/1000 ports, and switching capacity of 128Gbps. D-Link xStack Switches can stack up to 12 units in a stack, providing up to 336 Gigabit ports, and up to 40Gbps of shared stacking bandwidth in a ring topology or 20Gbps of dedicated stacking bandwidth in a "star" topology. The DXS-3326GSR stacks with the other xStack Switches including the DGS-3324SR, DGS-3324SRi, DXS-3350SR, and DES-3352SR, providing unprecedented flexibility in a switch stack environment.
Joining NETGEAR's family of Smart Switches with simple switch management at no extra cost, this 1U high, 48-port Gigabit switch maximizes bandwidth and density for great value and capability. With 48 10/100/1000 Mbps ports, each capable of powering 2000 Mbps of data throughput in full-duplex mode, plus four optional fiber ports, it provides a 40 Gbps backbone and connects servers or power users, delivering large amounts of multimedia, image, and video information in no time at all. Standards-based, it is ideal for combining 10, 100, and 1000 Mbps devices, as it delivers automatic speed and full/half-duplex sensing plus Auto Uplink on every port. Four hot-swappable Small Form-factor Pluggable (SFP) GBIC slots provide optional fiber connectivity for greater distance. An intuitive, web-browser interface offers simple switch management, making it a snap to monitor switch performance, configure ports, even set up trunks, VLANs, and prioritization.
NETGEAR offers wireless, Ethernet, powerline and phoneline networking products through a complete line of routers, gateways, switches, hubs, and adapters. NETGEAR products offer the strongest security and privacy options available to protect home and business customers.
PRODUCT FEATURES:
Adds fiber optic connectivity to the GSM7324, GSM7312, GSM7224, and FSM7326P;
Small size for high density fiber connections;
Meets SFP GBIC standard for use with any SFP GBIC compliant slot;
1000BASE-LX connectivity over 10Km;
LC connector;
Works with 9 ÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂõm single mode cabling.
Cisco Catalyst 6500 PoE 802.3af Gigabit 48Port (RJ45) LC |
Sony SINGLE QUAD SONY VPL-FE110 |
Freecom Superloader S4 16Slot SCSI |
Sometimes, for whatever reason, it's just not possible to pay for a product in full, at the time of purchase. That's why a Dabs Direct Credit Account can be so handy. When you purchase with instant credit from Dabs Direct you can be sure of two things: firstly that you're getting a good deal, and secondly that you won't miss out on a great product (such as this D-Link XStack 48-Port Gigabit Layer 2) just because you can't afford to pay for it in full right away. Take your time ... weeks or even months, the choice is yours; and then, if you want to pay off your account at any time, no problem, you can do that as well.
Not many UK electrical companies offer credit these days, and so when you find a well-known company such as Dabs Direct which offers instant approval credit accounts, with the balance not due for several months, then it's a deal too good to miss. Spreading the cost of your electrical purchase makes a lot of sense for many people, and although you may accrue some interest when using your Dabs Direct instant credit account, since the account is not a zero-interest account, the benefits are obvious, and more than worthwhile. So, the D-Link XStack 48-Port Gigabit Layer 2 can be yours for a lot less than you might imagine, and if you don't want to pay for it right away, then it's no problem.
So, if you're interested in owning the D-Link XStack 48-Port Gigabit Layer 2, then you can buy it right now and either spread the cost or pay in full when you purchase, using a credit card or debit card. Additionally, once you've shopped at Dabs Direct, then you can also take advantage of other special offers from Dabs Direct Electrical.